JOBS ON THE GO, HAPPENING RIGHT NOW                              HOME PAGE    

Here is a car we have done some work to before, this had a 396ci (5.0l Holden) COME motor and we built this 3.3litre Whipple system for the car, it made great power but with the huge flat tappet cam shaft that was in there the street manners where atrocious, at that stage the car was completely torn down. It now on the way back together, we have been inside the engine and fitted a new hydraulic roller, fitted a full upgraded clutch system with a twin plate clutch and flywheel assembly, built a very tough very quiet exhaust system, refitted and re-plumbed the fuel system and we have also redesigned the intercooler system and are about to tune it with 20lb's of boost, should be something pretty special.